The target set-up will be extremely flexible allowing the investigation of different materials under a large variety of conditions (temperatures, inclination, biasing, coatings, etc).
Parametric influences of the heat sink temperature, the inclination angle of the loop and the temperature difference on the convection motion and heat transfer performance have been studied.
Moreover, the effects of different key parameters such as the mass flow rate, solar irradiance, inlet water temperature and inclination were studied.
The influence of the evaporation temperature, the inclination angle, the mesh number, and the mesh layer on the maximum heat transfer capacity (Qmax) was analyzed.
Therefore, this study was carried out to determine the temporal changes in leaf temperature, leaf inclination, and heat stress injury in elite sunflower germplasm with changes in ambient air temperature at two locations over a three-year period.
Ideally, all the modules work in the same conditions, but differences between modules really exist due to differences in the working temperature, the inclination or orientation angles, differences in the I V characteristic coming from the manufacturing process, etc.
Dependence of atmospheric corrosion of Al on temperature, surface inclination, RH and state of surface has been investigated in a laboratory in terms of polarization resistance, solution conductance and corrosion product characterization.
The experimental results showed the heat pipe with molten-salt charge of 40 g responded much quicker than those with molten salt charge of 60 g, 70 g and 80 g respectively; meanwhile, the molten-salt heat pipe achieved the maximum condensation temperature at inclination angle of 50°.
Four types of evaporator temperatures versus inclination angles were observed.
The low-temperature negative inclinations were interpreted by the authors as partially self-reversed CRMs carried by titanomaghemite.
