Sentence examples for temperature efficiency from inspiring English sources

Figures 6 and 7 compare the pins' dimensionless temperature efficiency predicted using DTM and exact results.

The influence of the depth of the heat wheel, the airflow rates on the LHC and temperature efficiency were analysed.

Further, the responses of current, gas concentrations, temperature, efficiency, conversions to electricity/gas flow/temperature step inputs were respectively studied.

Temperature efficiency is obtained by varying system parameters such as the airflow rate, outdoor temperature, and indoor relative humidity.

Then, thermodynamic study for the adsorption reactions was evaluated and the results showed that by increasing the temperature, efficiency reaction decreased.

Results of the temperature efficiency are in good agreement with the experimental results for either dry or partially wet conditions within the range of experimental uncertainties.

The measured and modelled temperature efficiencies show adequate agreement and exceed 80% for a balanced nominal ventilation rate of 28 m3/h.

Experiments quantify flows and determine temperature efficiencies at several ventilation rates while accounting for heat gains from motors and air leakage.

If waste heat from the engine is used to maintain an elevated tank temperature, efficiencies of nearly 50% may be possible, indicating that the concept could be effective for practical hybridization of passenger vehicles.

GaAs is preferred based upon its higher IR reflectivity, lower temperature coefficient, and greater high-temperature efficiency.

Other characteristics of the system such as different dimensionless variables, plates and outflow temperatures, efficiency, and mass flow rate have been empirically modeled based on these variables.