Sentence examples for tapping holes from inspiring English sources

The convex and concave surface pressures of each blade were measured at 17 tapping points using 1.5-mm outer diameter and 10-mm-long copper tubes which were press fitted into 17 tapping holes.

The center's scientists, who are employed by the University of Vermont, have altered the face of the industry many times over with inventions to make sugaring more efficient and sanitary, including a special plastic spout that prevents tap holes from drying up or collecting bacteria.

Fume and hygiene hoods are widely used to prevent fugitive emissions from charge ports, tap holes and many other openings in mineral processing and smelting vessels.

This problem can be solved by forming tap holes by thermal drilling, when the material of the hole is not removed with chips but used for flanging, thus, ensuring sufficient screwing length.

To allow interchangeability between our two chambers, this positioning system is fastened to a custom-machined circular plate, containing 1/4′′-20 tapped holes in a square pattern with a spacing of 3/4′′.

Drill or tap holes into the bottom of the drawer for drainage.

Buy longer screws, and springs to match, that will fit the same tapped holes in the scope mount.

Or maybe it's the image on the cover of a weeping tap hole.

During that time, it's a race against the clock of the closing tap hole.

We've read the editorials but now the concept has a physical form and it's name is the "Arcade Pashley Bicycle with 600mm 3 Tap Hole Basin and Mixer Tap".

The crack, approximately one meter long, was initiated from a notch inside the hot tapped hole in a pipeline installed about 30 years ago.