Sentence examples for tapping a hole from inspiring English sources

Most die casters perform other secondary operations to produce features not readily castable, such as tapping a hole, polishing, plating, buffing, or painting.

AT THE bar at Simeri's Old Town Tap, a watering hole on the outskirts of South Bend, a down-on-its-luck manufacturing town, conversation turns to Bill Clinton.

Tap a small hole if necessary.

Tapping black hole science, a car could get about a billion miles out of a gallon of gas.

There is a small bathroom area at the rear of the cell, which consists of a tap and a hole in the floor for a lavatory.

Drill all of the holes needed, then tap an anchor into each hole, driving it flush to the surface.

To tap the hole, place a bullseye tapper (or a sturdy needle) on the star crack or the end of a crack.

It may be wiser to hire a professional instead if you can't tap the hole without a drill.

The crack, approximately one meter long, was initiated from a notch inside the hot tapped hole in a pipeline installed about 30 years ago.

This lug will have to be secured with a machine screw into a tapped hole.

Chen et al. [ 9] determined that tapping the pilot hole prior to inserting the screw tends to weaken the pullout force and produce less consistent results than by utilizing self-tapping screws.