Sentence examples similar to tapering of the width from inspiring English sources
The individual as well as combined effects of linear tapers in the width of the flanges and the depth of the web on the torsional vibration of cantilever I-beams are investigated.
The front segment consists of a 250 μm long and 6 μm thick tapered tip, with the width at its widest point being 15 μm.
The inverted taper coupler, embedded in a polymer waveguide, is optimized for both the transverse-magnetic and transverse-electric modes through tapering the width of the silicon-on-insulator waveguide from 450 nm down to less than 15 nm applying a thermal oxidation process.
The influences of some practical considerations, such as the geometry of the tapered cantilever and the width of piezoelectric patches on the root mean square of the generated electric power, are discussed.
For a given set of operating conditions the defined power loss model allows to optimize the design parameters for the power stage, including the gate-driver tapering factor and the width of the power MOSFETs.
With a careful tuning of the shape of the curve for the tapered section and the width of the straight section, this optimization resulted in more than a 75% increase in the neutron flux exiting the 33 m long guide over a straight m= 3.5 guide with the same length.
Because the Oculus tapers, the width of the skylight varies from 12 feet at each end to 22 feet at the center.
Taper the width of each leg from the thigh to the knee.
This will allow you to taper the width of the can allowing for a nice tight fit into the popping chamber.
The tapering of the distal humerus was characterized by normalizing the width in the anterior to posterior orientation at the narrowest part of the distal humerus to the length of the humerus, as illustrated in Fig. 3.
With the pressure loss considered, however, the best performance can be obtained at the height taper ratio (Λx) of 0.5 and the width taper ratio (Λz) of 1.8 among the taper ratios studied in the present work.
