Sentence examples for tapered type from inspiring English sources

In 2000, O'Sullivan reported torque curves for a prosthetic implant for the first time, and evaluated the characteristics of the tapered type by torque curves obtained by inserting five kinds of implants into the maxillary bone of unembalmed human cadavers.

Table 2 Planar bursters Onset Offset SNIC SH supH FLC SN c1 c2 c3 c4 Triangular Square-wave Tapered     Type I a, b Type V Type IV SNIC c5 c6 c7 c8 Parabolic       Type II       supH c9 c10 c11 c12 subH c13 c14 c15 c16       Elliptic       Type III The table shows the sixteen classes for planar bursters identified by Izhikevich.

Patients were assigned to intubation with one of the following two HVLP ETs with SSD on the experimental tube: tapered type (Taperguard™ Evac®; Covidien, Dublin, Ireland) or spindle type (Hi-Lo Evac®; Covidien).

The rate of achieving appropriate cuff pressure was 83.2% (332/1,974) for the tapered type and 82.4% (328/1,867) for the spindle type (P = 0.549).

Little or no difference in bearing strength occurs with change in taper type.

At the taper type ramp that has limited acceleration distance, acceleration profile indicated a decreasing trend with distance.

The numerical results show that the large displacement response of the beam is governed by the material distribution, the taper ratio and taper type.

It is also demonstrated that taper type has a significant effect on secondary bending and hence the final mode of failure in the joint.

The result shows that the tapered slit-type heat exchangers can replace the mesh-type heat exchanger, but the geometric configuration of slits and the compressible volume should be carefully considered for optimum performance of the cooler.

Simple energy conservation equation is applied for the design of the tapered slit-type heat exchangers with which the PTR is optimized.

A single-stage inline pulse tube refrigerator (PTR) with tapered slit-type heat exchangers utilized as the aftercooler and the cold end heat exchanger has been designed, fabricated and investigated.