Sentence examples for tape test from inspiring English sources
Adhesion of the nickel coating on PET was evaluated by a Scotch® tape test.
Tape test further verifies that there is a strong adhesion between the coating and the substrate.
Standard field and laboratory procedures including the Kato-Katz thick smear and tape test were employed.
The adhesion of the deposited Ni P coating to the substrate was ascertained by the scotch tape test method.
HAp coatings deposited using LALA remained intact during the Scotch® tape test and grew in the simulated body fluid.
The adhesion of the thin metal films to the polymeric surface is usually sufficient to pass an adhesive tape test.
Adhesive strength of sol gel coatings to the substrate was evaluated using pull off and tape tests.
The dry film properties of the organic coat with the nanoceramic base coat were studied by neutral salt spray test, humidity resistance, impact resistance and adhesion tape tests as per ASTM (American Society for Testing and Materials) methods.
A standard test method (Tape test-ASTM D 3359-97) was used for assessing the adhesion of the HA-Zn coating on the titanium substrate.
Adhesion of the coating to the substrate was determined by Scotch tape testing.
From Fig. 6, it was clearly shown that the sheet resistance for the films with mechanical press at 3 MPa and 10 MPa changes from 73.2 Ω/sq to 945.7 Ω/sq and 71.4 Ω/sq to 152.3 Ω/sq, respectively, after tape testing.
