Sentence examples for tangential bending from inspiring English sources
The tangential bending moments in chimney is evaluated from the SSI analysis and fixed base analysis of chimney.
Substantially lower concentrations of stress were noted with a stop hole using both a 90° (bending 38%andd torsion 56%), and a tangential (bending 58% and torsion 60%) cut.
The present work aims at studying the tangential bending process (wiping) and the combined effect of a bending and stretching stress on thin (0.7 mm) magnesium alloy (AZ31) sheets when working in warm conditions.
The present work aims at studying the combined effect of tangential bending and stretching stress (quite common in the stamping process, e.g. in the pinch or die shoulder regions) on thin magnesium (Mg) sheets when working at elevated temperature.
Internal joints have more influence on specimens under tangential bending (where the culms are bent across their width) than that under radial bending (where the culms are bent across their thickness).
The repulsive forces, normal force, tangential force, and bending moment are determined on the basis of comparison criteria of the beam bundle model (BBM).
The stiffness of a CSE on axial direction, tangential direction and bending direction can be derived based on the mechanical model and assumptions.
The mathematical model incorporates tangential viscous stresses and bending elastic forces, together with the inextensibility constraint and the enclosed volume constraint.
The representative figures of tangential and radial bending moments in the 100-m chimney for different Do/t ratios are shown in Fig. 12.
A total of 808 specimens were available for the measurement of the longitudinal modulus of elasticity (MOE) which was measured on specimens at green condition using the non-destructive method of Brancheriau and Baillères [ 42] based on spectral analysis of natural bending vibrations in the tangential-longitudinal plane.
Conversely, tangential swelling, volumetric swelling, moisture content, and specific impact bending decreased.
