Your English writing platform
Discover LudwigSuggestions(1)
Exact(4)
It has been shown that for the typical industrial systems the optimum current density jopt ∼ 670 A m−2 as the cost of $65 per ton of copper produced.
In addition, it is observed that, for both the ORC and Kalina systems, the optimum operating condition for maximum net output power differs from that for minimum product cost.
In the case of wind PV diesel and wind PV battery diesel configurations it is shown that, while using a high-enough margin of safety in sizing diesel generator leads to reliable systems, the optimum value for this margin of safety leading to a cost-effective system cannot be quantified without employing probabilistic methods of analysis.
In plant RH systems, the optimum dosage is the amount of irradiation that assures sufficient deletions without causing damage so serious that cannot be tolerated by the organism either during development or at the time of reproduction.
Similar(56)
For our system, the optimum values of T1 and T2 were 370 °C and 520 °C, respectively.
From these and the relevant investigation of frequency of the forced system, the optimum gains of the feedback forcing are suggested.
For this system the optimum process conditions are at 5 wt% water, a temperature of 53°C, and a pressure of 4.2 kPa.
Whereas for a realistic non-ideal DSG system the optimum transition is at 3.4 μm resulting in an efficiency around 30% depending on the concentration factor used.
In a preferred system, the optimum compositional distribution exponent (P) and thickness of intermediate graded layers and pure SiC layer are 1.0, 3.6 mm and 1.0 mm, respectively.
The results indicated that by using NSGA-II and MOPSO algorithms for the R-717 refrigerant based system, the optimum design parameters lead to electricity consumption decrease by 11% and 8% more than R-134a refrigerant based system, respectively.
By applying the proposed RBFNN approach in the system, the optimum active and reactive power of the BESS can directly be obtained without the necessity of performing the optimization process-based PSO at any change in load/generation.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com