Sentence examples for system slippage from inspiring English sources

With the aid of a DIC monitoring system, slippage profile at the interface between the concrete support and the mortar laminate along the contact region has been assessed, together with the fracture opening.

Based on this peculiarity, D'Ambrisi and Focacci (2011) observed three possible failure modes when the FRCM was applied as a strengthening system: slippage of the fabric within the matrix, delamination of the FRCM from the substrate, and fracture surface within the concrete.

Most of the time the RDX operates in front-wheel drive, but when the system senses wheel slippage, up to half the torque can be diverted to the rear wheels.

Some power is distributed to the rear wheels when the system detects wheel slippage, such as on gravel, wet roads, as well as ice and snow.

We next analysed the levels of CDK1 that have been shown to decrease in other systems of mitotic slippage [11].

So, this means that it is possible to construct a virtual system to acquire the slippage without the necessity of a physical test system and field experiment which are both costly and time-consuming.

Thus, "full time" four-wheel-drive systems must permit some slippage, so the front and rear wheels can rotate at different speeds when cornering.

A simple procedure is applied to update the drogue status by matching the drogue detection system data and the wind slippage correction.

A 3D model of an existing two-wheel drive tractor (SH500) is constructed in the 3D design software Pro/Engineer and exported out into the virtual prototyping software ADAMS in which the slippage virtual test system is established and the slippage virtual test is carried out.

For a given task and configuration, an analysis can be carried out to find the optimal input (vector of joint torques) to minimize or maximize slippage of the system.

To show more clearly the impact of the configuration of the snake robot on the acceleration and slippage of the system, Fig. 6 shows the best and worst configurations for the acceleration of the object Fig. 6a and for slippage ratio Fig. 6b.