Sentence examples for swept input from inspiring English sources

The swept input return loss curve in the range of 1 2 GHz of the 3DIMA showed a return loss of −13.15 dB at the resonant frequency of 1.872 GHz with a voltage standing wave ratio (VSWR) of 1.56; the radiation pattern has a maximum at 180° and agrees well with the simulation results, indicating that 3DIMA can be an effective approach for a CLAS.

When a mask contrast is applied at a different frequency (F2), the response to the swept input probe changes.

Within the SECM system, one line of the confocal microscopy image is rapidly acquired by measuring the spectral content of the remitted light using a high-speed spectrometer (broadband input) or a high-bandwidth photodetector (wavelength swept source input).

A particular frequency-sweep input is implemented to the nonlinear simulation model to achieve pole-zero transfer functions for yaw and pitch motions that were previously developed by the perturbed equations of motion.

And one consequence of that is that, in fact, if we sweep the input sinusoid only up to half the sampling frequency, we'll see no aliasing.

In other words, the frequency and the digital filter, or discreet-time filter, as we sweep the input frequency up, will move up in frequency until we get past half the sampling frequency and then essentially will move back down in frequency.

When using a sinusoidal sweep without accounting for clock drift, the resulting impulse response is seen to be convolved with an allpass filter having the same frequency trajectory form as the input swept sinusoid with a duration proportional to the input sweep length.

A separate SPICE implementation of the same model was reported by Yakopcic et al. [74] which were fitted and characterized for a multitude of devices for both sinusoidal and repeated sweep inputs.

The simulation results from the computational model were verified through experimental noise measurement for the gradient coil insert in a 4 T MRI scanner by using swept sinusoidal time waveform inputs.

The input signal frequency is swept with the electrical relay first in the closed position, then in the open position (see Fig. 4).

We present a newly developed single mode fiber based swept source polarization sensitive optical coherence tomography system using a single input state at 1040 nm.