Sentence examples for sweep measurements from inspiring English sources

The temperature sweep measurements indicated the obtained gel exhibited high thermal stability.

Interestingly, amplitude and time sweep measurements show reversible stress softening and stress recovery after high shear strain.

Additionally, evidence of an increase in cross-linking of thiolated chitosan as a function of time was provided by frequency sweep measurements.

Linear sweep measurements were recorded from −4 V to 4 V at a scan rate of 0.05 V/s and a preconditioning step at 0.002 V for 2 seconds.

With increasing C60 concentration, amplitude sweep measurements show that the films undergo a transition from viscoelastic liquid-like to viscoelastic solid-like behaviour.

The corrosion stability of graphene coatings was determined by electrochemical impedance spectroscopy and open circuit potential, while the corrosion rate was evaluated using potentiodynamic sweep measurements.

This paper reports on the use of the broadband dielectric impedance spectrometer to conduct frequency sweep measurement of soil samples at various moisture content levels, discusses the change rules of soil resistivity and relative dielectric constant with current frequency from 50 Hz to 106 Hz, and details the conduct of rational analysis and value fitting.

The measurement device has been driven in the "sweep measurement mode".

Figure 1a-d shows the I-V curves under four types of DC sweep measurement of the Ti/HfO2/Pt VCM device.

Based on the results of the strain sweep, the strain amplitude of 0.1 %, which exists completely within LVR, was selected for the frequency sweep measurement ranging from 0.01 to 100 rad/s.

Dynamic strain sweep measurement on VE⊃ACN has established a strain tolerance of ≈11%, which was determined from the crossover point between the storage and loss moduli.