Sentence examples for suspension reaction from inspiring English sources

A suspension reaction that depends on the suspension point deflection is connected with the string slopes to the right and to the left of the point.

The variables that influence the electric arc emissions are the contact wire surface conditions, the pantograph sliding contact conditions, the temperature, the train speed, the amplitude of the collected current, the mechanical suspensions reaction, and in general the mechanical characteristics of the catenary system [19].

In a typical fabrication experiment, the as-treated MWCNTs (100 mg) were dispersed in BaTiO3 sol solution by ultrasonication for 30 min, and then vigorous stirring was applied to the mixture suspension for reaction at 40°C for 4 h.

A system was constructed for visualizing the dispersion states of liquid monomer and polymer droplets in a suspension polymerization reaction in a non-intrusive and continuous manner using electrical resistance tomography measurements.

The main features of suspension polymerization reaction are based on (i) the initial liquid liquid dispersion requiring a controlled size and narrow distribution and (ii) on the control of the final particle size during the agglomeration step by avoiding fouling which is a bottleneck for continuous flow.

As a blank suspension, the reaction mixture operated in the absence of mRNA was treated in the same way as the rEhMCF protein suspension.

By taking cell models corresponding to simple geometries in which the cell is elongated (cell adhering and stimulated on one side, see Fig. 3) or spherical (cell in suspension), the reaction-diffusion equations can be solved.

Following exposure of the peptide to C. albicans whole cells and cell-free supernatants of C. albicans cell suspensions, degradation reactions were subjected to electrophoretic analysis.

The reaction suspension was agitated overnight.

Analytical samples were withdrawn from the reaction suspension after various reaction times and centrifuged at 10,000 rpm for 5 min to remove the particles for analysis.

Reaction suspension was irradiated by UV light of 365 nm at a power of 18 W.