Sentence examples for surface of the templates from inspiring English sources

This regulated autonomous deposition of the fibers will build patterned 3D-structure with unique properties on the surface of the templates, leading to a novel type of nanotechnology using biological systems with biomolecular nano-templates to design 3D-structures.

The sources were tilted at 25° with respect to the substrate normal axis, while the substrate was rotating in order to obtain a homogeneous deposition on the surface of the templates and minimize the amount of material entering into the pores.

The residual solution on the surface of the template was rinsed with distilled water.

The thickness between the surface of the template and the nanowire was estimated to be less than 500 nm.

In this deposition, the graffiti cathode is placed inside the reactor against the anodized surface of the template.

The surface of these carbon spheres is hydrophilic and possesses -OH and -C=O groups, which renders the surface of the template microspheres directly workable.

Deposition of the CeF3: Eu3+ phosphor layer onto the surface of the template-free SBA-15 was prepared using solution impregnation (S-I) by a sol gel process [9].

To make sure that the nanopores are completely filled, an overgrowth of nanowires was intentionally adopted, which resulted in the formation caps on the surface of the template.

Nanowires were sufficiently deposited with enough time so that the Cu overdeposits were fully exposed on the top surface of the template.

In addition, ac electrodeposition was conducted at 200 Hz, 12 V for 5 min. Third, the surface of the template was smoothed by dilute nitric acid solution.

Figure 2b is the side view of the vertically cut template, which clearly shows the AAO template possessing coterminous nanopores parallel to each other and perpendicular to the surface of the template.