Sentence examples for surface of the liner from inspiring English sources

The first is mounted flush with the surface of the liner grazed by the flow and the second is flush-mounted to the rear face of the liner.

The performance of acoustic treatments installed on aircraft engines is strongly influenced by the boundary layer of the grazing flow on the surface of the liner.

Nano-indentation testing has shown that the LATP process has created a region of reduced modulus in the PEEK polymer at the surface of the liner where the CF/PEEK has been tape-laid.

The metallurgical bond may be characterized by residual stresses in the liner and the friction coefficient between the inner surface of the backing steel and the outer surface of the liner.

Radiatively cooled tiles on the surface of the liner maintain the surface temperature between these limits, for a surface heat flux of between 0.1 and 0.35 MW/m2, a range which takes into account the uncertainties in the predicted operational heat loads.

2.2, when the interfacial gap is initially smaller than the deformation of the outer surface of the liner, the liner must be expanded to fit the inner surface of the formation.

Layer gravel carefully across the bottom of any exposed surfaces of the liner.

They developed a liner with a sintered porous glass bed on the inner surface wall of the liner.

Consequently, we obtained a detailed profile of both oxidation index (OI), trans-vinylene index (VI) and crystallinity index (CI), i.e. the OI, VI and CI values as a function of distance from the inner surface of the UHMWPE liner [ 18].

Although we did observe damage on the heads outside of this area, these marks were excluded from our analysis in order to only capture transfer that would likely have an impact on the bearing surface of the acetabular liner during normal use.

It was discovered that oxide and non-oxide femoral heads differently affected the oxidation processes at the surface of the polyethylene liners, all other testing parameters being equal.