Your English writing platform
Discover LudwigSuggestions(5)
Exact(7)
The most basic and least expensive cover, he said, is a plastic sheet that extends a couple of feet onto the surface of the deck around the pool.
A SASW test consists of recording the response of the deck, at two receiver locations, to an impact on the surface of the deck (Figure 16).
The most common problem reported with the use of partial-depth deck panels is reflective cracking on the top surface of the deck.
After each GPR assessment was completed, the bridge deck was rehabilitated using a hydrodemolition process to remove deteriorated concrete from upper surface of the deck.
The stability due to the solid barrier location was accomplished by the separated flows mutual interference effect; the unsteady pressure on the upper surface of the deck decreased significantly for the torsional motion.
This is the lower left corner of the top surface of the deck, nearest to you.
Similar(52)
It is clear that flutter instability of two-edge girders is closely related with the exciting source on the downstream side of upper and lower surface on the deck.
Another specimen comprising a rigidly supported, narrow width of decking where only local strains developed under load and which enabled strain measurements near the loads on external and internal surfaces of the deck, is also presented.
The zones located at the top surface of the bridge deck are where the maximum stresses can occur—"compressive" shear stresses near the deck supports and "tensile" shear stresses at the midsection.
Apply a temperature versus time curve to the top surface of the concrete deck and perform transient thermal analysis to simulate the heat transfer throughout the deck by conduction, convection, and radiation due to the applied fire curve scenario.
The height of the bents should be checked with the arch to ensure a flat surface for the deck.
More suggestions(2)
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com