Sentence examples for surface of the dam from inspiring English sources

With the fly/hooks attached, I send out the line to settle on the surface of the dam.

According to the official Xinhua News Agency, the earthquake "caused cracks on the surface of the dam of the Zipingpu Hydropower Station.

Many displacements, concomitant with the transition from highest to lowest level, are measured on the downstream surface of the dam by radar instruments, which at present are promising innovations in dam engineering.

The construction process for new tailings impoundment has been physically simulated in the laboratory, where the tailings particle composition and distribution below a beach, the change of phreatic surface of the dam, and the engineering properties of the tailings of the dam profiles have been measured.

ERT profiles I_I that were set up in July 2012 (Figure 10b), September 2012 (Figure 10c) and September 2013 (Figure 10d) along the dam crest show average resistivity values within the dam structure ranging from 150 Ω.m in the lowest and wet part of the dam to more than 3000 Ω.m near the surface of the dam covered by dry gravel (with maximum values in the north-eastern part near the explosion area).

Fig. 28 Fine particles covering the landslide dam. a Photograph taken on 4 June 2015; b grain size distribution of the sample taken from the surface of the landslide dam.

The nonlinear FEM was used to obtain the crack length of the foundation surface of the gravity dam, and the linear response surface method based on the orthogonal test design method was used to calculate the reliability, providing a reasonable and simple method for calculating the reliability of the serviceability limit state.

For reservoirs or ponds (most water bodies), maximum depth was estimated as the difference in height between the water surface and the bottom of the dam.

In this study, the limit state equation for tensile reliability analysis of the foundation surface of a gravity dam was established.

Thirdly, these limits were determined on each ERT profile and then interpolated to create surfaces representing the upper limits of the dam materials and underlying alluvium.

The predictions are: (1) the maximum surface subsidence within the mining area is 2.14 m, with the maximum settlement point located in the mid-west area of the coalfield, and (2) the nearest distance from the boundary of the surface movement area to the edge of the dam foundation is 35 m.