Sentence examples for surface of the construct from inspiring English sources

The finite strain profile at the level of the membrane and the free surface of the construct was quantified using microbeads.

Beginning at day 7, the surfaces of the construct began to glisten, suggesting an increased hydration and presence of GAGs (Fig. 1).

Both the locating stage and loading plate were fluid permeable (TECAPEEK, Ensinger GmbH and Co., Nufringen, Germany) and perforated to facilitate nutrient transport to all surfaces of the construct.

Total surface area of the construct as calculated from cross sections was larger after transplantation of GBP-1-EPC compared to control EV-EPC.

In brief, total cross section surface area of the construct was quantified for both groups, GBP-1 EPC and control EPC, according to the method previously described by Arkudas et al. [ 27].

A series of nano-indentation tests were carried out to obtain the mechanical and surface properties of the constructed material.

Surface charges of the constructed GP aerogels were tuned from positive to negative within a wide range via changing solution pH.

This construct was inverted and a transparent PDMS film with a thickness equivalent to the PS microsphere diameter could then be applied with a flow coater on the top surface of the initial construct [ 20].

Figure 3 shows that the Integral formula assumes the tearing surface of the bone/screw construct occurring at the surface formed by the thread peaks along the screw shaft.

Hence, the discrepancy between the experimental observation and the Chapman's assumption about the tearing surface of the bone/screw construct may induce a prediction error for the pullout strength of conical screws, such as the Diapason.

Histological examination suggested that shear stress (4.0 dyn/cm2) on the luminal surface of the constructs induced morphological changes in their walls.