Sentence examples for surface of the beam from inspiring English sources

If the total number of oscillations of the two waves during their separate paths add up to be an integral number just after recombining on the partially reflecting surface of the beam splitter, the light from the two beams will add constructively and be directed toward a detector.

The beams were reinforced with steel plates bonded to the tension surface of the beam.

This ensured a uniform and frictionless load transfer from the actuators to the top surface of the beam.

This might have been due to the bottom surface of the beam being uneven, causing stress concentrations.

The displacement (u) is more at the top surface of the beam as compared to the bottom surface.

A uniformly distributed load P = 20.0 N/mm is applied, on the top surface of the beam.

By studying the internal stresses and cracks in a beam-column joint with mechanical anchorages, the failure process is revealed: with bonding along the development length of the anchorages, diagonal cracks begin to occur and these cracks propagate to the top surface of the beam-column joint where they open at the surface, and finally, the opening of diagonal cracks takes place.

An additional concrete block placed on the top surface of the beam-column joint also has two effects: to increase bond performance along the development length of the anchorages and to restrict crack penetration to the top surface of the joint.

Single proof mass is suspended by thin eight beams, and sixteen p-type silicon piezoresistors are formed at the top surface of the beams.

Accelerometer consists of highly symmetric single crystalline silicon crossbeam structure with 20 conventional two-terminal p-type piezoresistors diffused on the surface of the beams.

In the theory part, it is assumed that the beams are simply supported at both ends and the ideal liquid is in contact with the lower surface of the beams.