Sentence examples for surface of specimens from inspiring English sources

The fracture surface of specimens is reasonable to bond strength obtained.

This technique, which collects mass spectrometric data from the surface of specimens, has previously been applied to a variety of animal fossils to identify the presence of fossil melanosomes, including bird feathers, amphibians, mammals and squid ink.

In fact, SSMs have been systematically observed on the fracture surface of specimens when the crack propagation velocity is higher than 2800 m/s, jointly with the presence of a curvature jump along the crack front shape.

The experimental results and fracture surface of specimens show that the equivalent method based on local failure is reasonable.

Based on Miner's rule and data of Pittingroded multiaxial fatigue test, the alternate causedion-multiaxial fatigue lives are predicted.

The fatigue mechanisms were studied by SEM examination of polished surface of specimens and fracture surfaces.

The surface of specimen was characterized by contact angle measurement, scanning electron microscope (SEM), and Fourier-transform infrared spectrophotometer (FT-IR).

As an example, Fig. 7 presents the peak strain distribution on the surface of specimen IT-H400D25.

The drastic increase of oxidation kinetics of this material caused by intense oxidation not only the outer surface of specimen but also the surfaces of pores.

Concentration depth profiles of a single p-cluster (a) and wetting layer (b) recorded on the surface of specimen А 2 with the buffer layer Si0.9Ge0.1 10 nm thick.

Additionally, the sponges soaked with water attached to both end of the specimen are sometimes stressed and water drains out into the surface of specimen and this causes variation of measurement of the bulk resistivity.