Sentence examples for surface ingress from inspiring English sources
Furthermore, well liner clearance was a significant factor in all models, indicating that direct surface ingress is a significant well contamination mechanism.
Selecting a non-sloped surface to ingress or egress a scissor lift is also preferred to reduce risk.
Geochemical data, highlighting zones of increased ingress of surface water into the groundwater, confirmed areas of discontinuities in the clay layer, which act as preferential flow paths.
In contrast, the distal tailings, or slimes area, have a higher moisture content close to the impoundment surface, thereby impeding the ingress of oxygen and limiting sulfide oxidation.
The continued pozzolanic activity of fly ash and slag is responsible for the formation of more self-healed and hydration products on the crack surface which reduced the ingress of chloride ions and subsequent reduction of corrosion.
Chloride ion concentrations (chloride ingress) at the surface layer and at the core of tested specimens were determined after 6 and 12 months of exposure.
To investigate the effect of concrete surface finishing on the chloride ingress for marine structures, compressive strength, chloride migration and pore structure of concrete with various finishing methods were evaluated and then chloride ingress time was calculated based on test results.
We also show that both temperature and hysteresis affect the chloride ingress at the surface more than in deeper layers of the concrete specimen most likely due to a drying effect.
The corrosion products formed on the galvanized steel surface could inhibit the further ingress of the chloride ions and enhance the protective property, while such effect was not obvious for the zinc metal.
ACE1 is tightly regulated at the transcriptional level; transcripts are only found in the penetration peg of the fungus, a specialized hypha that allows ingress through the surface of the leaf and into the plant cell [ 81].
These results suggest that the hydrogen ingress caused instability of metallic surface, increasing the surface area activity.
