Sentence examples for suitable precision from inspiring English sources

An apparatus has been developed which is capable of making measurements with suitable precision and some preliminary data for the nitrogen argon system at 1.2 bar and 24°C are given.

The developed method allows the determination of target compounds below the level established by the European Union for waters for human use with suitable precision (relative standard deviations lower than 18%) and accuracy (with recoveries over 61%).

The following key features were obtained: linearity (R2 > 0.999, both for diacetyl and 2,3-pentanedione), high sensitivity (LOD of 0.92 μg L−1 and 2.80 μg L−1, and LOQ of 3.30 μg L−1 and 10.01 μg L−1, for diacetyl and 2,3-pentanedione, respectively), recoveries of approximately 100% and suitable precision (repeatability and reproducibility lower than 3%and7.5%5%, respectively).

Once the estimation error is sufficiently small, such that the observer variables track the true population with a suitable precision, this observation stage ends.

The quantitation limit (QL) is the lowest amount of analyte in a sample, which can be quantitatively determined with suitable precision and accuracy.

A good analytical performance was attained, including a suitable precision of low detection limits.

Hydrogels can be used for sensor or actuator applications depending on their swelling behavior: highly sensitive hydrogels are better suited for sensors while hydrogels with lower sensitivity are more suitable for precision actuators.

By using the experimental design (DoE) technique, we optimized an analytical method for the determination of mercury isotope ratios by means of cold-vapor multicollector ICP-MS (CV-MC-ICP-MS) to provide absolute Hg isotopic ratio measurements with a suitable internal precision.

In general, pure orthologous groups are suitable when precision is of higher importance than sensitivity.

We plan to investigate enhanced fabrication techniques, such as a modified PDMS formulation [ 20] and coating procedure [ 14], to realize thinner layers (~2 μm) with suitable thickness precision and control of optical properties.

It is suitable for the precision measurement of the workpiece.