Sentence examples for successive loading from inspiring English sources
Following this cycle, an increased stiffness, repeatable response was observed with successive loading.
Samples were also tested after successive loading cycles, which resulted in a mechanical strength decrease after each cycle.
This may cause progressive shifting of stiffness and strength centres away from this flexible edge, leading to consequent increase of effective eccentricity in successive loading cycles.
The main feature of the present process is a successive loading of air with vapor up to a relative high humidity, such as 10 or 15 wt.%.
Loading and unloading mechanical cycles show a significant hysteresis and perfect superposition of the successive loading curves demonstrating damage done during loading is recoverable in nature.
Results showed full superimpositions of LH with both RF and VL activity from terminal swing, 80 100% of gait cycle, to successive loading response (0 15% of gait cycle), in around 90% of strides, as reported in adults.
The first step of cyclic loading was from 10 to 40 N, and the upper limit was increased by 10 N for each successive load level.
The obtained results give emphasis to the importance of the reactor geometry and reveals the aptitude of the catalyst to be reused during successive loads of fuel without any treatment and minor loss of activity.
On the other hand, the biaxial features of bending moment histories applied to a given RC column section tend to reduce its actual capacity and to accelerate the strength and stiffness deterioration process during successive load reversals.
The construct was conditioned by applying a pretension of 10 N for 1 min with successive continuous loading of 500 mm/min [ 13, 14, 26].
By comparing the estimated state with the experimentally observed state at different applied load cycles, it is inferred that (1) it is important to consider the correlation between the maximum crackwidths between two successive applied load cycles (especially at lower applied load cycles); and (2) NHMC model shows promise for modelling fatigue cracking in reinforced concrete beams.
