Sentence examples for substrates were cut from inspiring English sources

Briefly, substrates were cut into 1 × 1 cm2 using automated cutting machine (Struers, Tegramin-25, Denmark).

The substrates were cut into a number pieces and each piece coated with a different DLC thickness.

The substrates were cut 1 × 1 cm2.

The substrates were cut into 5 × 5 mm pieces for further modification.

Si(100) and corning glass substrates were cut into 1 × 1 cm2 and washed using acetone and methanol in ultrasonic bath for 10 min and 5 min, respectively.

Before the deposition of TiO2 paste, FTO glass substrates were cut by 1.0 × 2.5 cm2 in dimension and were sonicated successively in acetone, isopropanol, ethanol, and deionized water for thorough cleaning and dried in N2 gas stream.

The films with a substrate were cut into two pieces and adhered face to face, which were subsequently cut at the joint position to make a slice.

The Cu foils (25 μm thick, 99.8 % polycrystalline, Alfa Aesar #13382) used as substrate were cut into a small rectangle shape with a size of 2.5 cm.

The preparation procedures of cross-section specimen for HRTEM observation are as follows: The films with substrate were cut into two pieces and adhered face to face, which subsequently cut at the joint position to make a slice.

The NCP-based substrate was cut into 1.3 cm × 1.3 cm square sheets and attached to glass substrate by adhesive tape.

First, the metal substrate is cut down to 50 μm in diameter using WEDG, then, the micro-diamonds with 0 2 μm grain is "plated" on the surface of the substrate by composite electroforming, thereby becoming a multilayer micro-grinding tool.