Sentence examples similar to substrates treated in from inspiring English sources

To investigate the mechanism by which the Au NPs were deposited onto the substrates, we prepared PDMS and glass substrates treated under different conditions, which resulted in different surface wettabilities (Table S1 and Fig. 3).

Adult midges were exposed to different substrates treated with 'dry' conidia and conidia suspended in 0.03% aq.

Southern pine blocks treated commercially with micronized copper azole or treated in-house using copper ethanolamine were used as treated wood substrates.

Since the substrates were treated in the same way by micro-etching before solder mask application, differences in the substrate roughness could be excluded with regards to adhesion differences between solder mask A and B. Thus, the differences must be associated with the individual solder mask formulation.

All substrates were treated in methanol before the deposition process.

Prior to self-assembly, all substrates were treated in Piranha solution (H2SO4/H2O2 = 3 1, v:v) to clean the organic compounds and provide a hydroxylated surface.

Then, the substrates were treated in a 80 °C piranha solution (3:1 H2SO4/H2O2) for 30 min and washed with deionized water several times.

The glass substrates were treated in a HNO3 solution with a concentration of 50%% at 60 °C to enhance hydrophilicity and then were subsequently cleaned using acetone, ethanol, and distilled water in an ultrasonic bath.

The silicon substrates were treated in the same way except for methanol rinsing and plasma etching.

The STO (111) substrates were treated in hot water followed by cleaning in the organic solvents and annealing in air at 1050 °C for 1 h to obtain an atomically flat and Ti-terminated surface.

Hence, the growth of In nanowires was the synergic effect of treated Zn substrate and SDS. Figure 8 The SEM image of Zn substrate after treated in concentrated sulphuric acid for 6.5 h.