Sentence examples for submitted to static from inspiring English sources
The results show that meshless methods are capable to efficiently analyze composite laminated plates submitted to static loads under linear elastic regimes.
In this work, the cohesive zone model proposed by Valoroso and Champaney[5] will be applied in the study of the behavior of steel-cement interface, submitted to static loading.
The present paper describes the material/structural concept of this footbridge, its design and construction process, and summarises the response of the prototype when submitted to static short and long-term load tests, and dynamic load tests.
This paper presents the results of a global comparison between high strength steel and normal steel circular tube used to build steel and composite columns submitted to static loading, as regards the economic aspects.
This study deals with characterization of the damage and thermomechanical behavior of the Glass Fiber-Reinforced Polymer composite materials (GFRP), submitted to static tensile loadings, using a passive infrared thermography technique.
A finite element model submitted to operational static loads is developed for pure mechanical analysis of a stack.
A mixture of powders in proportion 50% Al, 50% Si (wt.%) was employed and processed, the build zone being submitted to a static magnetic field provided by permanent magnets.
In the present subsection, we are considering that the reconstructed surfaces using the points obtained in the isosurface extraction, which after imposing the boundary conditions and applying a uniformly distributed load, are going to be submitted to a static analysis study.
On the second occasion, the subjects were submitted to the static handgrip exercise.
Herein, their mechanical properties were investigated through a comparative analysis of samples either with or without rigid plates glued to their opposite faces and submitted to quasi-static compression.
The experimental set-up is submitted to vertical as well as horizontal static loads (via hydraulic jacks) and an electrodynamic shaker is used for dynamic excitation of the system.
