Sentence examples for subframe i from inspiring English sources

The load displacement relationship of each group of components of each subframe i, such as M F.r,i, is derived separately.

The additional stiffness of a horizontal subframe containing a BRB can be expressed as that of an equivalent pin-jointed subframe with modified properties (Fig. 5) and that, Open image in new window Fig. 5 a Subframe i and BRB before rotation, b subframe i and BRB after rotation.

where i denotes ith subframe and (i 4) denotes the four subframe delay from subframe i. δ PUSCH is the TPC command value, which is defined in Table 1.

The superposition of results of the preceding sections leads to the expanded version of the characteristic equation of bending of subframe i at response stage r, i.e., (V_{r,i} h_{i} + M_{PDelta.r,i} ) = phi_{r} [K_{C.r,i} + K_{B.r,i} + (1 + bar{K}_{D.r,i} )K_{F.r,i} ] = phi_{r} K_{r,i}^.

Then under Log rule, in any subframe,: (i) the next available RB is allocated to a user satisfying (14) with ties broken in favor of the user with smallest index,   (ii) is decremented and is updated based on the new buffer state.

The time period of performing CCA is 25 μs, which is much shorter than the length of a subframe (i.e., 1 ms) [8, 19].

The processing time required between an UL grant and the corresponding UL transmission is 4 subframes (i.e., 4 ms) in the current standard [16].

Our contributions and new ideas include (a) a joint allocation scheme is first developed in the time domain and the frequency domain, including the consideration of the proportional fairness among UEs; (b) a new evaluation function based on an optimization technique is proposed to determine the configuration of subframes, i.e., normal and protected subframes.

(33) and (34) the corresponding subframe stiffnesses K i and moments M i P can be computed as shown in Fig. 7a.

One frame contains I subframes.

Since there is a time gap between a UL grant and the corresponding UL transmission, UE may not be able to transmit in the granted subframe if LBT fails, i.e., the channel is occupied by WiFi users.