The objective is set with its front element uppermost, and the eyepieces are angled upward so that the observer can study specimens that are still in their watery medium.
In our study, specimens were tested under cyclic loading to evaluate energy dissipation.
In the first phase of the study, specimens with a constant water cementitious binder ratio were tested.
In this study, specimens failed after yielding and at least close to 0.83 (see Table 7) of the ultimate strengths of the connected bars.
Given this situation, Yu and other Chinese botanists tried their best to study specimens of Chinese plants during their visits to Europe, especially type ones.
In this study, specimens of carbon fibre-reinforced polymer (CFRP) laminate strengthened beam-type cantilevers with bottom steel bolt anchors were designed and tested.
In the present study specimens with plain and chemically treated steel fibers are subjected to four-point bending with concurrent monitoring of their acoustic emission (AE) activity.
Based on the results of a previous study, specimens with gold and dark green colors were chosen as evaluation points in the present study.
In the present study, specimens with Ni P and Ni P/SiC composite coatings were deposited on cast iron by the electroless plating method.
Perhaps the greatest remaining limiting factor for in situ experiments is specimen thickness, which limits electron penetration, making it impractical to study specimens thicker than roughly 0.5 1.0 μm.
In one study, specimens consisting of 35 whole chickens, 27 chicken livers, and 38 chicken faeces were assessed using a combination of three culture methods, and just over half (57%) were found to be positive for Campylobacter contamination (Ghazwan [2006]).
