Sentence examples for stripping technology from inspiring English sources
Use of efficient asphalt pavement stripping technology, on-site reclamation, and linked two-way transport of asphalt debris and processed asphalt paving mix between asphalt mix plants and paving sites has led to extensive recycling of asphalt pavement in the Mid-Atlantic region of the US.
This study showed that ABE removal rate by the vacuum stripping technology was much higher compared to the gas stripping technology, which typically has removal rates below 0.5 g/L/h [ 32, 35].
Longer operating time required by the gas stripping technology leads to higher energy consumption for an associated blower and condenser, potentially incurring higher operating cost and resulting in higher butanol production cost [ 14].
Furthermore, vacuum stripping likely has lower capital investment compared to gas stripping technology [ 14].
ABE fermentation integrated with novel vacuum stripping technology successfully controlled the butanol concentration in broth below 6 g/L, and allowed near-complete utilization of glucose when the food waste concentration was as high as 129 g/L.
Fermentation of food waste at higher concentrations with the vacuum stripping technology can potentially reduce energy requirement, water consumption, and volumes of process streams and processing equipment, thereby reducing butanol production cost.
Their design is based on the resistive-strip technology and thus renders the detectors spark tolerant.
The detector has been realized using the resistive-strip technology and decoupling the amplification mesh from the readout structure.
These results represent an important milestone in the development of highly granular calorimeters using scintillator strip technology.
We have designed and built a high spatial resolution dosimeter based on silicon micro-strip technology for characterization of small radiotherapy and radiosurgery fields.
Both detectors employ silicon micro-strip technology to cope with the charged particle fluxes of up to 5×105cm−2s−1 that are expected in the innermost regions of the detectors.
