Unfortunately, we were unable to obtain the experimental value of this parameter for the applied stress limitation of the apparatus.
Empirical indices have been developed from field measurements, like WBGT, and the heat stress limitation is expressed by environmental parameters.
In the second part, some usual geometries, proposed in the literature about stress limitation, are compared with respect to the maximum load transmitted by single lap joint.
The compressive strength at 10-day age for GMS15 composites was too low to be determined due to the minimum stress limitation of the compression testing machine (5 MPa).
The finite element model (FEM) analysis of this structure shows that the maximum static stress intensity of all the components is within the stress limitation under ITER operation condition.
The stress limitation imposed in EC2 [1], as well as, the calculation of crack widths and deflections make mandatory the evaluation of concrete and steel stresses at critical cross sections subjected to the service combinations of actions.
A genetic algorithm was employed to solve the constrained objective function, finding an optimal blade for which the starting time was small and output power was high while the stress limitation was also met.
As shown in Fig. 9a and b, in all the ITS series reinforced with 420 or 550 MPa reinforcing bars, the stress increase in prestressing steel (Δf ps ) was within the stress limitation of 250 MPa, and the maximum value of Δf ps appeared in the reinforcing index ranging from 0.2 to 0.3.
