We designed accelerated life tests (ALT) of interconnects under chemical stress in order to demonstrate failure detection capability.
Therefore, we did not perform tests with a maximum stress that was greater than threefold the vertical stress in order to restrain pollution by extra damage.
In particular, ECGs must be performed at rest and under stress in order to reveal any possible abnormalities that are typical of cardiovascular ischaemic events.
It determines the stress in steady state which is used to estimate the allowable transient stress in order to achieve the required 30 years life design.
The stress-optical coefficient has to be assumed to decrease with stress in order to estimate the crystallinity from the birefringence of films under high stress.
Finally, it should be considered that amphibians represent a strongly imperiled group of organisms for which it seems mandatory to minimise any additional stress in order to avoid population collapse.
Since the material layers in the laminate are elastically unidentical, stress redistribution takes place in them under the action of applied stress in order to maintain same strain in all the layers.
Therefore, it was necessary to determine an equivalent stress in order to make SN curves of different specimens comparable, since base SN curves results from experimental tests in which the nominal stress is used.
Therefore, it has become increasingly important to study speech under stress in order to improve the performance of speech recognition systems, to recognize when people are in a stressed state and to understand contexts in which speakers are communicating.
In Fig. 4 we demonstrate this by simulating with β=−1 mN (with couple stress) and also with β=0 mN (without couple stress) in order to verify that the code works as expected.
System technical failure was modelled by developing a Weibull failure model incorporating a physically tested corrosion profile as stress in order to quantify the survival rate of the system under additional operational covariates including marine pH, temperature and pressure.
