Sentence examples for strengthening contribution of from inspiring English sources

The precipitation strengthening contribution of copper and carbide precipitates jointly, in the 1.7 CuTiMo steel, is 380 MPa.   4.

It is demonstrated that when only epoxy adhesive is used, the shear strengthening contribution of the HCPs is limited by the tensile strength of the concrete substrate of the strengthened beams.

[1] has been successfully employed to calculate the strengthening contribution of the T1 phase and the increase in strength due to strain hardening has been modelled using X-ray line broadening measurements of dislocation density, using the modified Williamson–Hall approach.

As such, this study has investigated the root cause and various strengthening contributions of vanadium additions to bainitic linepipe steels.

How to add the strengthening contributions of these obstacles to predict yield stresses and work hardening is an important question.

The presence of deformable matrix strengthening precipitates and particles in the T7751 microstructure resulted in a local decrease in resistance to the motion of "mobile" dislocations, causing a progressive loss of strengthening contributions to hardening.

The combined effects of 11 alloying elements (Al, C, Co, Cr, Cu, Mo, Nb, Ni, Si, Ti and V) are investigated on the basis of: a suitable martensite start (Ms) temperature, the suppression of undesirable phases, a minimal Cr concentration in the matrix and the potency of the precipitation strengthening contribution.

The precipitation strengthening contribution in the 1.7 CuTiMo steel is 380 MPa, which is nearly one and half times the yield strength of the CMn steel.

Second, the Labusch-type analysis for an N-element alloy is conducted by treating M-elements (M < N) as an effective medium and summing the strengthening contributions from the rest of N-M elements as individual solute species.

The resulting parametrized model successfully reproduces the measured local chemical composition, volume fractions, mean radii and precipitation strengthening contributions within a single set of model parameters up to 800 °C.

The individual and combined precipitation strengthening contributions was calculated using the size and volume fraction of precipitates and compared with the measured values.