Sentence examples for strength samples was from inspiring English sources
After filtration with 0.45 μm disposable polysulfone filters, a modified ion chromatography procedure for low ionic strength samples was used for the analysis of and [38].
Flexural bending strength samples were cut from eight culms in three 3-m segments (base, middle, and top).
To increase the strength, samples were sintered at 1,000 °C for 40 min, and allowed to cool down at the oven temperature.
The breaking strength of samples was strongly related to the infill level, although a significant variability resided in the level of layer height used during 3D printing.
The acidic strength of samples was measured by NH3-TPD.
The compression strength of samples was analyzed using a Yinchi YC-125B tension meter (Shanghai, China).
The impact of oven drying on compressive strength of samples was determined prior to testing.
A 28-day tensile strength of all samples was 96 100% of the tensile strength of the control samples and the setting time was increased by 15 min.
The flexural strength of the samples was measured from room temperature to 1600 °C.
The impact of NCC on tensile strength enhancement of samples was notable.
Residual strength of repaired samples was compared with that of standard and ruptured ones in tension experiments and FE analysis.
