Sentence examples for strength sample from inspiring English sources

The sublimation condensation phenomena during microwave freeze drying are studied numerically for different operating conditions including electric field strength, sample thickness, and vacuum pressure.

Again, while these findings had statistical strength, sample size does not allow for further analysis.

The pH junction uses a high pH sample buffer while stacking uses a low ionic strength sample buffer.

Flexural bending strength samples were cut from eight culms in three 3-m segments (base, middle, and top).

From the aspects of the deformation and mechanical strength, samples using AgCu3 as the inner and outer sheath is a good choice.

The effects of the number and geometry of access points (APs), the number and spatial arrangement of reference points (RPs), and the number of signal strength samples taken per location are presented, both through simulations and analytical lower bound estimates.

Bisphenol A was also detected for the Deltron DBU, Nason Finishes and Imron Industrial Strength samples.

After filtration with 0.45 μm disposable polysulfone filters, a modified ion chromatography procedure for low ionic strength samples was used for the analysis of and [38].

To increase the strength, samples were sintered at 1,000 °C for 40 min, and allowed to cool down at the oven temperature.

At the same time, the column's capacity should be high enough to allow the injection of high ionic strength samples without impairing the retention time characteristics of perchlorate.

For the measurement of the fluoride content the following analytical techniques were used: direct calibration and incremental techniques (the method of known addition for low ionic strength samples with a fluoride concentration of less then 0.38 ppm) [ 22].