Sentence examples for strength of the coating from inspiring English sources

Adhesion tests showed cohesive failure of the monetite coatings and the tensile strength of the coating was in the range of 15.43 ± 0.20 MPa.

This deteriorates coated optics and to improve mechanical strength of the coating, a nanotop layer on the antireflection coating has been developed.

The adhesion strength of the coating was evaluated by performing the scratch test and the PEO-EPD coatings showed higher scratch resistance than the PEO coating.

The cohesive strength of the coating at critical length (ℓ c) can be expressed as (3).

The adhesion strength of the coating is determined with the pull-off device (DEFELESCO).

The bonding strength of the coating is about 19 MPa.

Moreover, robustness of the superhydrophobic coating against mechanical shear and adhesion strength of the superhydrophobic coating were tested, and the results demonstrated that the coating surface was stable.

The adhesion strength of the duplex coating was greater than the ESD coating due to the existence of high hardness and high thickness.

The results demonstrate that the substrate roughness and the coating thickness have significant influence on the bonding strength of the amorphous coating, e.g. the bonding strength increases when the substrate roughness is above a certain threshold, and decreases with the increasing coating thickness.

It is found that the creep strength of the diffusion coating tends to be higher than that of a similar coating tested previously by Pan et al. [Pan D, Chen MW, Wright PK, Hemker KJ. Acta Mater 2003 51 2205].

Two distinctly different relationships between the critical depth and the yield strength ratio of the coating to the substrate have been noted.