Sentence examples for strength of core from inspiring English sources

Compressive strength of core samples.

Test parameters included the strength of steel flanges, strength of core concrete, and filling of core concrete.

This chapter describes the effect of sodium, which is used as coolant in fast reactors, on corrosion and mechanical strength of core and structural materials.

We have characterized the microstructure (microfracture density), porosity, density, permeability, elastic wave velocities, and strength of core from the high-enthalpy Rotokawa Andesite geothermal reservoir under controlled laboratory conditions.

Compressive behavior like ultimate strength, stress strain curve, ductility and toughness of TPCC and effects of plastic pipe thickness, the cubic compressive strength of core concrete (fcu) on them were investigated in this paper.

The test results reported the failure mode and shear resistances of structures, studied the influences of thickness of the steel skin shell, curvature, spacing of the connectors, depth of the cross section, strength of core materials, and boundary conditions on the ultimate strength behavior of the curved SCS sandwich beam.

The compressive strength of cores drilled from the slabs cast outdoors and not cured with moisture was smaller than that of the lab-cured control slab by 39%.

On the other hand, while the HFT was performed at depths of 249 266 m, Yamashita et al. (2009) estimated the tensile strength of cores recovered from a depth of about 325 m because they could obtain only one test piece for tensile stress measurement from cores recovered from depths of 249 266 m.

The recently developed methods, which are described in this chapter, are tensile strength of small samples, tensile Young's modulus of mesospecimens, compression strength of cores, compression strength in a drilled hole, mechanical resistance to pin pushing, Young's modulus derived by measuring the hardness and shear strength of screw withdrawals.

The drastically narrowed the time span during which evolution of all known limb morphotypes must have occurred calls for a skeletogenic mechanism with a propensity to generate a profusion of patterns due to small genetic changes affecting limb bud shaping and the rates and strengths of core interactions.

However, a thickness effect of the foam core on the collapse strength is observed for collapse by core shear: the shear strength of the core increases with diminishing core thickness in relation to the cell size.