Sentence examples for strength of control from inspiring English sources
Results showed that partial replacement of PC by SCM increased the compressive strength of control mixtures at 28 and 90 days (except for FAF at 28 days).
Although curing in the lime solution can reduce the strength of control concrete, Curing the specimens containing SiO2 nanoparticles in lime solution causes faster setting time together with higher strength and residence to water absorption.
The other 12 specimens were tested under fatigue loading with load ratios ranging from 0.2 to 0.6 (defined as the ratio of the maximum fatigue load to the average static bond strength of control specimens).
Compressive strength development of Portland cement mortars with 10%and25%5% replacements by RSA yielded 107% and 98% of the strength of control mortar after 28 days of curing.
The analysis and comparison of the three ATMS research areas in the classification framework suggest that the causal strength of control strategy research is greater than that of reason maintenance algorithm research.
Adding 4.5% calcium nitrate and 4.5% urea caused an increment in the compressive strength of about 108% and 82% for 90 and 365 days in exterior winter conditions, respectively, when compared to the compressive strength of control sample that was exposed to the same conditions.
However, the observation of a difference in differential activations between FM patients and health controls at very low force levels (0-1 Kg), but not higher force levels (2-4 Kg), supports that a generally higher maximal strength of controls compared with FM patients [ 24] is not the primary cause to the findings of this study.
The fire resistance was evaluated by comparing the residual mechanical strengths of heated specimens with the strengths of control specimens.
The splitting tensile strengths of control and internally cured samples are shown in Fig. 13.
Single shear tests (pull-out test) were conducted to investigate bond strengths (pull-out strengths) of control (unexposed) and exposed specimens.
A relationship between the strength of the control field and the control fidelity is established.
