Sentence examples for strength of block from inspiring English sources

The ratio can be expressed as a function of ultimate strength of block such as 0.02f bu (dimensionless).

Open image in new window Fig. 7 Variations of yield and ultimate lines corresponding to the ultimate strength of block.

Figures 11 and 12 show the load variation corresponding to the strength of block and grout concrete, respectively.

Besides, a thorough assessment on the mechanical strength of block work produced with PFA-HCWA binder was conducted.

The stiffness and the strength of block lattice truss materials were derived, as well as polyhedrical yield surfaces.

This means the plastic deformation decreases gradually corresponding to the increase of ultimate strength of block due to brittle behavior as shown in Fig. 7.

(2) The prism test result showed that when the grout concrete strength was lower than or similar to the strength of the block, the block strength governed the prism strength.

It is based on three characteristics of perceivable blocking artifacts, the strength of the block boundaries, the discontinuities across the block boundaries and the flatness of the image.

If it is satisfied, after 28-day curing, the compression strength of the masonry can be decided through the prism test or unit strength test of block.

It reaches 2%% of the maximum compression strength of the block, and the total average value without considering the compression strength change of the block was about 80%% of the strain when the strain at the elastic limit was at the maximum strength.

It is important to distinguish between the high strength of a block of solid or intact rock and the much lower strength of the rock mass consisting of strong rock blocks separated by much weaker joints and other rock defects.