Sentence examples for strength member from inspiring English sources
In the optimization formulation, the cost rise due to steel strength enhancement of shrunken segments is taken into account in the nominal weight of whole truss, and a series of requirements related to truss vertical stiffness, member strength, member stability, and truss stability are set as constraint functions.
The influence of cyclic loading upon the residual strength of aramid-fiber strength members has been examined experimentally.
The tests conducted here established that aramid-fiber strength members are insensitive to tensile fatigue when the cyclic amplitude is a small fraction (2%) of the break strength.
It was found that the parallel-lay internal strength-member design suffered strength losses of up to 50% due to just 2000 bending cycles, despite using a very high sheave-to-strength member diameter ratio (D/d) of 120.
Other internal strength-member designs shown to be more tolerant of bending fatigue were of braided construction and/or used low-modulus aramid fibers.
Tests indicate that the new joint concept presented herein using glued wood-to-steel plate joints can possibly reduce the cost by matching joint strength to member strength.
Fire resistance is governed by steel strength, the member section factor, types of protective measure taken, and load.
As can be seen in Fig. 7 and 8, no clear tendency was investigated with the effect of concrete compressive strength and member depth on the predictions for shear strength.
Basically, with specific revisions, it is applicable to all situations dominated by circulatory torsion, such as high strength concrete members (Bernardo et al. 2012b) and box section members (Bernardo et al. 2013; Jeng 2015; Wang et al. 2015).
The Unite for Strength board members include the actresses Amy Brenneman and Kate Walsh of the ABC drama "Private Practice" and the actor Ken Howard.
Cold-formed high strength steel members are increasingly used as primary load bearing components in low rise buildings.
