Sentence examples for strength level of from inspiring English sources
The design strength level of 75 100 MPa was achieved using water-cementitious material ratios of 0.22, 0.26 and 0.31.
In each series, four push-out specimens were tested covering different sizes of channel shear connector and different strength level of HSC.
This bimodally grained feature is attributed to the relatively large plastic strain for the strength level of 1000 MPa at room temperature.
These values present a good to excellent bond quality, depending on the strength level of ordinary concrete, reflecting a good adhesion to the substrate, which manifested a positive monolithic response.
The Japan Steel Works Ltd. (JSW) has many manufacturing experiences of large integrated forgings made from high strength MnMoNi steel with tensile strength level of 620 MPa for steam generator (SG) pressure vessel, and has performed confirmation tests of its material properties.
The main variables considered were concrete strength, level of axial load, reinforcement arrangement, volumetric ratio and strength of tie reinforcement.
These relatively low spall strength levels of the S2-glass and the E-glass fiber reinforced composites have important implications to the design and development of GRP-based light-weight integral armor.
The comparison of theoretical with experimental textures, and of predicted with observed anisotropy of plastic flow, is utilized to determine the slip geometry and the relative strength levels of the different deformation systems.
The HEA pillar samples can reach extraordinarily high strength levels of ∼4 4.5 GPa, which is ∼3 3.5 times higher than that of the bulk HEA; meanwhile the ductility is significantly improved.
NREPA, Kelly says, is actually pro-forestry on a micro level, but not at the industrial strength levels of yesteryear.
Compression strength levels of NCB and PE-treated samples were 5.9 ± 0.7 MPa and 2.7 ± 0.4 MPa, respectively, corresponding to a 54% reduction in compressive strength by PE treatment (P < 0.0001, Figure 2(a)).
