Sentence examples for strength caused by from inspiring English sources

Spatial heterogeneity of frictional strength caused by varying fluid overpressure allows differently oriented fault planes to satisfy the failure criterion.

The external explosion strength caused by vented explosion in linked vessels is much higher than that in a single vessel.

The degradation of the compressive strength caused by the mix proportion of red-mud appeared to be comparatively less in ASS than in OPC.

This indicates that the degree of the reduction in strength caused by the turn of the vane blade is less significant than that caused by remolding by kneading.

Moreover, the problem associated with conventional second-order plastic-hinge analyses, which do not consider the degradation of the flexural strength caused by lateral torsional buckling, is overcome.

The problem associated with conventional second-order plastic-hinge analyses, which do not consider the degradation of the flexural strength caused by local buckling, is overcome.

An experimental investigation for the structural behavior of single shear bolted connection fabricated with aluminum alloys (6061-T6) has been carried out by Kim et al. It is found that ultimate strengths caused by curling (out-of-plane deformation in the direction of plate thickness) were reduced for some specimens with long end distances parallel to the direction of loading.

To quantify these changes, profiles of response strengths were measured along the line (7.2 mm long) drawn anteroposteriorly in the single-orientation maps (0°: Fig. 3b; 90°: Fig. 3c) and compared between the data from before and after GR. Figure 3d depicts the net decrease or increase of response strengths caused by GR.

Since the energy density of the electromagnetic radiation is proportional to the square of the electric field strength and the field strength is caused by acceleration of a charge, the energy radiated by such a charge oscillator increases with the square of the acceleration.

This paper reports the results of a numerical investigation concerning the relevance and Direct Strength Method (DSM) prediction of the ultimate strength erosion caused by local-distortional-global (LDG) interaction in cold-formed steel fixed-ended lipped channel columns.

Much of the current strength is caused by temporary factors.