Sentence examples for stream pressure from inspiring English sources

As result, the stream pressure drops are treated as optimization variables.

During this evaluation process, the optimal distribution of each stream pressure drop within enthalpy intervals is fully utilized.

The usual objectives in design are to obtain the required transfer of heat whilst observing constraints on hot and cold stream pressure drop.

Considering the additional effect due to the pressure difference between inlet and outlet, an additional force term equal to the exit area Ae times the exit pressure minus the free stream pressure must be considered.

The reduction of shock-associated noise in inverted-velocity-profile coannular jets is quantified and explained by (1) conducting extensive optical and acoustic measurements for a suitable range of outer and inner stream pressure ratio combinations, and (2) interpreting the measured noise results with the aid of new theoretical models.

In this aim, several RHVTs with the different geometrical helical generators, control valve angles, RHVT bodies and inlet stream pressures were performed experimentally.

Also, correlations are developed for the motive steam pressure at the nozzle exit as a function of the evaporator and condenser pressures and the area ratios as a function of the entrainment ratio and the stream pressures.

The influences of primary nozzle on the performance of steam ejectors were investigated numerically, and the effects of the primary nozzle outlet diameter as well as the divergent section length under different entrained stream pressures on the steam ejector were analyzed and discussed.

The pressure recovery of streams is carried out simultaneously with the HEN design, such that the process conditions (streams pressure and temperature) are variables of optimization.

The critical free stream static pressure originating flutter of the shell is determined by solving the eigenvalue problem.

Continuous sulfur removal is studied for the NG feed stream, with pressure of 6.8 MPa, flow rate of 2850 Nm3/hr and molar composition of 95.98% methane, 0.00182% water vapor, 1% carbon dioxide, 0.0134% mercaptan and 3% heavier hydrocarbons (C3+).