Sentence examples for strains distribution from inspiring English sources

A bimodal distribution is usually observed when strains have abnormally elevated MICs, with strains distributed above the upper end of the "susceptible" strains distribution defined as "resistant" strains (Laboratory Standards Institute, CLSI guidelines).

On the one hand, a unique generic technique in terms of depth of plastic deformation, plastic strains distribution for analyzing the plastic deformations on the work piece is presented.

Lastly, a full-field measurement technique (Digital Image Correlation) has been used at high temperature to test the model's ability to qualitatively and quantitatively predict the surface strains distribution of TP composites in high gradient structures.

A propagating buckle front is arrested at an edge defect close to the specimen edge due to a reduction in the residual strains distribution in the vicinity of the edge defects.

The classic assumption of Bernoulli (plane cross-sections perpendicular to the axis of the beam before bending remain plane and perpendicular to the bent axis of the beam after bending) has been used to calculate the strains distribution inside the beam cross-section.

The present paper addresses with intermediate crack (IC) debonding failure modes in FRP-strengthened reinforced concrete beams; a non-linear local deformation model, derived from a cracking analysis based on slip and bond stress, is adopted to predict the stresses and strains distribution at failure.

Figure 1 Hydrostatic strain distribution.

Strain distribution factor (SDF) is proposed to quantitatively characterize the strain distribution.

The strain distribution is quite similar during three situations.

(b) The strain distribution with the depth by calculation.

Under both loading conditions, the strain distribution is irregular.