Sentence examples for strain bands from inspiring English sources

Based on simultaneous infrared thermography and digital image correlation, a good correlation between the evolution of temperature profiles and the local formation and propagation of Lüders-like strain bands is observed.

With two clamps the strain band was mostly symmetric.

The strain band was most straight at 0.15h clearance.

At 0.25h clearance the strain band was more s-shaped and a peak on the strain curves was shown at each of the multiple intersections between the line and the strain band.

With two clamps the strain band was almost symmetric, whereas with one clamp the strain band was shifted towards the free strip end, and a large strain concentration was formed around the tool on the free side.

As the crack propagates, strain band density and dislocation density at the crack tip increases correspondingly.

The extra width of the strain band appeared on the unclamped side of a line between the tool edges.

Shearing with one clamp resulted in a large strain concentration at the lower tool and a wider strain band as compared with shearing with two clamps.

With two clamps (Fig. 10 b, d) the line mostly coincides with the high strain band, especially for the 0.05h and 0.15h clearances.

The strain band across the sheet was most straight for the 0.15h clearances; the curvature increased for both smaller and larger clearances.

Shearing with two clamps resulted in a symmetric strain band whereas there was an extended area with large strains around the tool at the unclamped side when shearing with one clamp.