Sentence examples for stirring was set from inspiring English sources

Temperature was maintained at 30°C and stirring was set at ca. 160 rpm.

The temperature was 30°C, stirring was set to 200 rpm and pH 5.5 was maintained with 3 M KOH.

The temperature was maintained at 30 °C; stirring was set at 200 rpm, and the pH was kept constant at 3.7 by addition of 3 M KOH.

The temperature was 30°C, stirring was set at 900 rpm and pH was controlled at 5.5 with 3 M KOH and 1.5 M H2SO4.

Anaerobic conditions were obtained by sparging with nitrogen gas (200 mL min−1), the stirring was set at 200 rpm and the temperature was maintained at 30 °C.

The air flow was adjusted at 0.5 VVM and initial stirring was set at 400 rpm.

The stirring speed was set at 270 rpm after testing different agitation speeds from 150 to 350 rpm.

The stirring speed was set to 240 rpm for the dissolution and cross-linking steps for both chitosan and alginate films.

Stirring speed was set between 850 and 1,300 rpm in order to maintain dissolved oxygen above 20%.

The stirring speed was set to 300 rpm and the power to 10 μcal/s, and the experimental data were collected at 23 °C.

Twenty milliliters of (20% v/v) TEOS in cyclohexane was carefully added to the water CTAC TEA solution and kept at 60 °C in a water bath for 12 h (stirring rate was set to 125 rpm).