Sentence examples for stirring method and from inspiring English sources

The CFs with different weight percentages (2, 4, 6, 8 and 10 wt%) were thoroughly dispersed in the PDMS matrix using a high-speed shearing and stirring method and then the GF was filled with the mixture.

In this investigation, we synthesized ZnO nanosheets by stirring method and characterized by X-ray diffraction patterns (XRD), field emission scanning electron microscopy (FESEM), Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), and energy dispersive spectroscopy (EDS).

The objective of this work is to reinforce Al 1100-Mg alloy with different wt% of SiC (0, 3, 6, 9 and 12) was added by melt stirring method and Extrusion is carried out (extrusion ratio of 12.25) for the same alloy and composites.

Al2O3 doped Mn3O4 nanomaterial was synthesized by low-temperature stirring method and applied as a catalyst for the degradation of organic pollutants under solar light for prospective environmental applications.

Chen et al. (2000) fabricated SiCp reinforced with A 356 alloy matrix by molten liquid aluminium stirring method, whereas Davidson and Regener (2000) manufactured 10 wt.% of SiCp-reinforced AA 6061 matrix composite by double-sided cold compaction process applying a pressure of 385 MPa for 5 min followed by pressureless sintering at 610°C for 5 h.

The test results reveal that the combination of ultrasonic bath process and stirring method has the best dispersion efficiency and the obtained nanofluid possesses the highest AC breakdown strength.

Although you may feel a little silly doing it, the blowing and stirring method is actually one of the most effective ways to cool a hot drink.

The other six parts were placed in an ultrasonic bath and treated for the same times as that of stirring method at 20 kHz.

ZnO nanosheets were synthesized by thermal stirring method in which 0.1 M of zinc nitrate aqueous solution was titrated with 0.1 M solution of NaOH till pH reached above 10 and stirred at 70°C for overnight.

The objective of this work is to reinforce Al 1100-Mg alloy with different wt% of SiC (0, 3, 6, 9 and 12) was added by melt stirring method for the same alloy and composites.

The preparation of α-MnO2 nanotubes (M-NT) decorated with platinum nanoparticles (Pt/M-NT) by a simple reduction and mechanical stirring method is presented in this work, which aims to design a highly active catalyst for the Li O2 battery.