Sentence examples for stiffness procedure from inspiring English sources

However, due to the study timeline, and technical and training requirements, the automated stiffness procedure was not implemented until the clinical trial enrolled 20 participants.

Based on the stiffness function, an optimization procedure is proposed in this paper to maximize the effective Young's moduli of laminate composites in both longitudinal and transverse directions with respect to a number of design variables.

Comparisons with both experiments and numerical predictions show good accuracy of both the proposed homogenization methods and the overall stiffness evaluation procedure.

Providing it is known that the structure, in its undamaged state, is homogeneous with respect to stiffness, the procedure will detect the areas of inhomogeneity that are caused by the incipient damage.

A reduced DME oxidation mechanism, which was obtained using rigorous mathematical reduction and stiffness removal procedure from a detailed DME mechanism with 55 species, is used in the present DNS.

Full details of the stiffness estimation procedure can be found elsewhere [25].

The nanoindentation measurements, using a three-side pyramidal Berkovich diamond indenter of 40 nm radius (faces 65.3° from vertical axis), were conducted under the continuous stiffness measurement (CSM) procedures [15], which was accomplished by superimposing a small oscillation on the primary loading signal and analyzing the resulting response of the system by using a lock-in amplifier.

While several analytical procedures have been developed in the past to estimate track stiffness, there is no procedure readily available for estimating track damping.

Therefore, preoperatively patients should be carefully briefed on the unpredictable results following a revision procedure for stiffness.

In the optimization procedure, the stiffness parameters of the added braces are described as the design variables.

To validate the procedure, identified stiffness reductions are related to quantities measured during pseudo-dynamic tests and to observed damage.