"steady mode" is correct and usable in written English.
It is typically used in reference to a situation that is stable or predictable, or to describe a person's attitude. For example, "After a difficult year, we are finally in steady mode."
Three configurations of the plasma actuators with single and multi AC-DBD actuators are used in steady mode of operation.
Assuming the pedestrian crossing the road on a steady mode with a constant speed, the critical distance of pedestrian S P (m) can be calculated by Eq. (10).
Furthermore, creating more discrete patterns near the boundaries of the steady mode in the vorticity field can enhance the internal convective heat transfer rate.
Analysis of predicted and experimental results shows that refrigerators consume more power in the transient mode as compared to the steady mode, therefore shortening the transient period can lower the energy consumption of the system.
In the case of steady mode, transverse detonation always couples with an acoustic wave at the contact surface of burned and unburned gas and maintains stable rotation without changing the detonation front structure.
On a uniform hexagon-triangular staggered grid, the co-volume has two steady modes and two inertial-gravity modes on the hexagonal mesh, and one steady mode, two inertial gravity modes, and two spurious modes on the triangular mesh.
The ramp temperature has been chosen in such a way that the boundary layer is reached a quasi-steady mode before the growth of the temperature is completed.
The following two different approaches of supplying initial and boundary conditions to drive CFD-Urban were evaluated by comparing the resulting tracer gas transport fields to field data: (i) using observation obtained from a single sounding site during the URBAN 2000 field experiment and (ii) using WRF output in quasi-steady mode.
The time average selectivity of the products favors the side product under both control modes, when compared to steady state mode.
Most of catastrophic mechanical failures in power rotor shafts occur under cyclic bending combined with steady torsion: Mode I (ΔKI) combined with Mode III (KIII).
Results have shown a significant reduction of the crack growth rates when a steady torsion Mode III is superimposed to cyclic Mode I.
