Sentence examples for steady method from inspiring English sources

Of course, it also helps one's slow and steady method when there's $15 million in venture funding from Sigma Partners, Mohr Davidow, and Jeff Bezos to fall back on.

For a 3-stage LHS unit, the optimum phase change temperature of each stage increases by 14.9 K, 26.4 K and 38.0 K respectively with respect to the values obtained by steady method, which causes the heat storage capacity decreases by 6.1% and entransy dissipation decreases by 10.6%.

The new silicone rubber is submitted to electrical tracking and erosion tests using two different approaches described in the IEC 60587: the step and steady methods.

Thirty specimens of marble, calcarenite and sandstone were tested with steady methods (dry index and water absorption by capillarity), that validated the data provided by the two innovative IRT techniques.

Thus, a quasi-steady method is proposed in this paper to simulate redistribution of snow on roofs.

A quasi-steady method which uses observed mean pressure coefficients to predict the expected peak positive or negative pressures is developed.

Such quasi-steady method is generally valid since the tested aerodynamic damping ratios, though scattered, roughly meet the quasi-steady formulae.

In this study, a quasi-steady method was used to measure the thermal properties of the carbon paper; hence, the phase transformation in the presence of PTFE was investigated.

As the low-frequency turbulence cannot be well generated by wind tunnel in general, this study explores a quasi-steady method for compensating the effect of low-frequency turbulence.

Furthermore, it is demonstrated that while the provisions of the Australian/New Zealand wind loading code AS/NZS1170.2 2002, which is based upon the quasi-steady method, is adequate as far as mean internal pressures are concerned, it however underpredicts peak internal pressures in some situations.

This study aims to investigate the potential and the limitations of a BIM-based energy analysis by means of an Italian commonly used software for energy diagnosis and certificates, according to the quasi-steady method specified in the UNI/TS 11300-1 2008. 11300-1 2008