A solid dual pulse motor for hot-firing test was designed, manufactured and statically tested.
After fabrication and assembly the design is statically tested and compared to the predicted model performance.
The foamability and foam stability of the preferred foaming agents were statically tested.
At the end, one shell was statically tested until final failure.
For this reason, one full scale RC frame designed according to Eurocode is statically tested to investigate the behavior of the frame with and without masonry infill wall.
Numerical results with the proposed model for the interfacial shear stress distribution and the load displacement response are derived for beams statically tested.
The post-blast damage and mode of failure of each panel was observed, and those panels that were not completely damaged by the blast were subsequently statically tested to find their residual strength.
Five (5) Memory Metal Spinal System constructs and titanium 5.5 mm diameter Moss Miami constructs were statically tested on an INSTRON 8874 Bi-Axial Table Top Servohydraulic Dynamic Testing System in torsion, measuring the yield torque (N-m), torsional stiffness (N-m/degree) and the peak torque (N-m).
Specimens were quasi-statically tested to obtain results of the joint tensile and compressive strength.
Twelve Nitinol stents (Absolute Pro, Supera, Lifestent, Innova, Zilver, Smart Control, Smart Flex, EverFlex, Viabahn, Tigris, Misago, and Complete SE) were quasi-statically tested under bench-top axial and radial compression, axial tension, bending, and torsional deformations.
